Ok so ive been putting the bike back together after a small crash at the end of last summer. The dash glass was smashed so I got myself a damaged dash from the US and took the glass. and apart from smashing the headlights and having to plug all that in no other electrics were harmed in the making of that movie! So it all worked fine started up everytime over the winter when I wanted to run the engine for a while. So ive slowly been adding bits and then this week im finishing off touching up some paint and added the fairings wooo here we go.... NOPE go to start it today power up fuel pump primes and it starts engine blubbers into life and then bam the power cuts out engine dies. The dash keeps trying to power on but cuts out, the immobiliser light is flicking madly and the fuel pump starts and stops priming over and over as well as the clicking of the immobiliser. This is if the power even comes on at all. If i turn the power off the immobiliser and alarm arm as intended and deactivate/go off as intended. Anyone had anything like this before? i havn't had chance to look at anything yet as it was dark out...im hoping to tackle it tomorrow early and some suggestions/ pointers on what to look for would be muchly appreciated!:redface::frown:
