1198 screen bolts

Discussion in '848 / 1098 / 1198' started by simiansmythe, Jan 28, 2013.

  1. Can someone with a standard 1198 screen take some shots of the std bolts and rubber nuts holding the screen in place. I am fitting a powerbronze double bubble and the old rubber captive nuts where glued to the zero gravity screen that came with the bike (not the standard screen) so I need some more but the bolts on my bike are m4x0.5 pitch which is finer than standard so i am having difficulty getting the rubber nuts as the normal pitch is 0.7. Cheers.
     
    #1 simiansmythe, Jan 28, 2013
  2. The stock fasteners are the fine pitch. You can get spares from your dealer or pro bolt do them.
     
    #2 nelly, Jan 28, 2013
  3. If you buy them from the dealer here are the part numbers (sorry I could only find € prices)

    Wellnut - 75010281A @ €1.22 each
    Washer - 85210241A @ €0.13 each
    Special Screw - 77510071AB @ €2.38

    Ouch - nearly €30 for the set of 8

    I ended up buying these off eBay 10 BOLT MOTORCYCLE SCREEN/FAIRING FIXING KIT - BLACK | eBay for £3.76. They are a larger width but do not require any drilling to fit.
     
    #3 chrisw, Jan 28, 2013
  4. Thanks for the info guys.
     
    #4 simiansmythe, Jan 29, 2013
  5. If you're sticking with the stock screws, the wellnuts are about 60p each from probolt
     
    #5 nelly, Jan 29, 2013
  6. #6 AJL277, Jan 31, 2013
  7. Do you still need pictures? My 1198 is standard, I'l be happy to email you some if you wish?
     
    #7 Ian, Feb 3, 2013
  8. Ordered some M4 x 0.5mm pitch well nuts from probolt so thanks for advice guys, will post some pics soon.
     
    #8 simiansmythe, Feb 3, 2013
(You must log in or sign up to post here.)
Do Not Sell My Personal Information