Is there a technique to remove the front callipers from the front wheel. The clearance seems very tight almost on the verge of marking the paint work. thought it was best to ask first without causing any cosmetic damage cheers Jamie
You need to push the brake pistons back, then you can tilt the calipers a bit and they clear the wheel.
If you’re not sure with twisting the caliper, pull the pads out. That’ll give you loads of wiggle room
I use a large flat-head screwdriver between disk and pad. Just twist the srcewdriver and it pushes the disk/pads apart giving enough room to slide off the disk - it only needs a few mill.
