Having a few issues with the back brake after standing for 15 years, looking for a service kit for the rear calliper and I suppose a replacement master cylinder, it may be shitty inside when I strip it, so new is possibly best. looked in the obvious places but cant seem to find a rear calliper seal kit-1997 916 Thanks Pat
Master cyl has a plastic piston in an alloy bore, so go carefully if it is seized up and you are stripping it to clean and re-furb.
Not seized but not right, possibly just replace but i have a weep from rear calliper so need a service kit for it.
I have the same issue with my rear brake (‘97 748) this week. I was going to rebuild the ms with a seal kit from here https://www.ducatipaddy.com/www-ducatipaddy-com/New-Brembo-Parts#&gid=1&pid=1 or here https://mcet.de/eshop/en/brake-syst...-c/brembo-seal-kit-ps-11-rear-master-cylinder or here https://addictionmotorsport.co.uk/b...inder-repair-kit-ducati-aprilia-ktm-110436241 …but I would need to disassemble the ms to find out for sure which kit I need, so I found a used and apparently good ms on eBay. Just waiting for that to arrive now. I bought a brand new caliper from eBay cos the last one looked like it took a direct hit from an artillery shell.
