Hi i know this might be a long shot, But. I have a set of FG8500s with correct top and bottom yokes etc but unfortunately no fork bottoms! Is there anybody out there that may have a set to help finish off my bike? Cheers!
Good luck, ive a set of fg43 on mine with 6bolt caliper bracket. I found a 108mm one, but not been able to find a 100mm one. So Ive been looking for bottoms myself and no luck so far. But Ive been mainly looking for 6bolt 100mm ones tbf.
Hi, I have these made by motoworks in the us. I bought them about 6 years ago as they were advertised as Showa fitment but it transpires they are actually for the ohlins type of forks fitted to 996 era bikes. Obviously they were intended for replacing the axial calipers to radial. They are new old stock, never fitted. 100mm spacing. I never used them as I ended up fitting ohlins forks from an rsv4. I am in Germany until mid December, but they are in my lockup in the uk. £150, is the price. However as They came to me with no info and I never fitted them I cannot offer any guarantee or returns.
Hi doogalman thanks for you reply. Do you have the brackets for the front mudguard? And could you possibly measure the inside diameter to confirm if they are for the 43mm forks.
I do not have the brackets as I was going to fabricate a pair. 99.9% sure they are 43mm but I can not measure until I return to the UK
Ok doogalman thats ok as i too work away from home so if you are happy i can wait until your back. Thanks
