Hi, Would be grateful of some advice, I bought my bike without realising that at some point when the front wheel had been removed a spacer got left out! I have bought 2 used spacers and was wondering which way they should fit, if anyone has got any pictures or advice would be great, thanks in advance.
If you go onto the Ducati.com web site you can down load the parts diagram and that should give you the information you want. Andy
You should have two of the small one and a single larger one. The small ones insert either side over the bearings. The large one goes on the left side (nut side).
I was going to say 1 small and 1 large but on checking the Ducati Omaha site it showed 2 small. (couldn't be bothered going into the garage to look). As above then. You can only get them to fit one way due to the shape of the axle.
