Hi I need the plastic cover in nice condition from a 996/916 ignition barrel please and also the lower hose from the bottom of the water pump. does anyone have anything? thanks Tony
Actually, you might be right as the one beside it appears a larger bore which would make more sense being attached he’d directly to the pump. It’s hard to tell from the pictures, I’d have to look at the parts diagram & get the part no.
Thanks for the replies, there is a possibility my friend might have one from his 998. so will check that out firstly. Unfortunately this pipe is missed off all the microfiches by the looks of it, you can make it out in the background of the diagrams, but the pipe appears to be a ghost! I think part 23 is referring to the one just in front/above it.. Still need the plast cap from around an ignition barrell if poss? Mine had something stuck on it from an old alarm and the glue has taken some of the writing with it.
I would get a new hose, rather than relying on some unknown part. Especially in the application that it is used. Can only be a few quid for piece of mind.
I would, but I cant find it on the microfiche on all of the models I have look at so struggle to give a part number to a dealer. I normally just get all of my new parts online.. I will give them a call
Found it! its on the cylinder schematic so I can get a new one! thanks all, I just presumed it was NLA new given it was ghosted out
