Any one had prob with mirror working loose at pivot ? Cant tighten them looks like warranty job or take them off .
Just had a set replaced under warranty. Fixings to fairing were tight, but pivot was starting to get loose. Rear view is now much better, without vibration in mirror.
mines going in on thurs warranty job sissy cant tighten them mine also fold in at speed ,lol self streamlining bike
Bit of a bump here. The right side mirror stalk is loose. The bolts under the screen are ok that hold on mirror unit, but outer stalk is loose. Is this a warranty job or is there a way to tighten the stalk ? Tks.
Mines gone into hyside today for a load of work. The mirrors are shit anyway (and loose) so im replacing mine with those design corse blanking indicators. Will let you know how i find them (i know some people cant ride without mirrors but im not one of them).
My right hand one is doing it but out of warranty and they won't move on it How did you get them to sort it?
Hi I have just had same problem I fixed it for virtually no money Take a very small black cable tie Push /place the thin end into and down the gap in the loose pivot section Take a very small flathead screwdriver ,and push cable tie into gap Then cut flush the remainder Basically I wedged a cable tie in gab No more wobble s and you can't see anything (unless you get real close Regards Simon
