These are in overall good useable condition. They're well made bits and really made a difference to how my monster looked, on top of the looks they offer loads of adjustment for the foot position and the brake/gear pedal. The cost when new was £480 and you can feel that quality. Unfortunately they sustained some damage in a low side, but I continued to use them after that. I only had to do a makeshift repair on the toe peg that operates the rear brake peda. This could quite simply be replaced with something neater. They utilise the rubber grommets off the o/e rear sets (for the lower 2 holes) and the o/e main bolt that goes through the centre of the rearset. I sold the bike about a year ago and these have been tucked away with what looks like most of the fittings, it makes a lot more sense when you have the original part next to it to see where everything fits. I know the gear selector rod is there, it connects to the original parts,the metal bracket at the bottom of 1st pic fits behind one of the rear sets to replace an o/e bracket, there were a few other small brackets and bolts stored with it that I'm including just incase they are needed. Some small bolts/parts may be missing, I have no idea and this is up to the buyer to research/solve themselves! I had to make a small adjustment to the rear brake (shorten the hose slightly) but nothing major, apart from that they bolt on pretty straight forward. Not really sure what they're worth but I'm open to offers, got them on eBay but would end early if I'm happy with the offer, and would rather sell through here! Jordan
