got a stone chip on rear wheel so.... ...touched it in real careful like and rubbed excess off with some autoglym resin polish..... stood back and thought must be a good job yeah :smile: too my horror found that I had shined that one spoke and the rest of the wheel is a satin finish ...b.ll..s ! any ideas apart from the obvious £800 new wheel one of course !! I think it's a powder coated finish
Flatten it back with 1200 wet & dry then polish it very lightly with T-cut. Don't overdo the polishing or it will end up gloss again.
Thanks Derek but it's powder coated I am told by the dealer..so is 1200 wet and dry goin to work ?..scared to try this to be honest
You could get both wheels freshly powder coated for less than £100, I've had loads of sets done. just shop about, try local tyre fitters and service centres, you'll find most have a good connection with painters/powder coasters as a lot race and get their own bikes done
