749 Rear Wheel Tq

Discussion in '749 / 999' started by Spjallen, Mar 14, 2015.

  1. Does anyone really use 133 ft pds? It's an amazing amount. Be interested if anyone uses a different spec and why. Mines an 05 S with a black swinging arm
     
    #1 Spjallen, Mar 14, 2015
  2. I use 180 nm (132.8 ftlbs) on my 999
     
    #2 chrisw, Mar 14, 2015
    • Like Like x 1
    • Agree Agree x 1
  3. If you think that's a lot you wanna see what a single sider gets torqued too then. Or the flywheel nut!
     
    #3 1037sps, Mar 14, 2015
    • Like Like x 1
    • Agree Agree x 1
  4. Agree it's high, i just read in the service guide:
    Rear wheel nut M 30x1.5 180* GREASE B
    and went looking for this. WAY more than my GSXR twin swing arm.
     
    #4 Cream_Revenge, Mar 13, 2016
  5. ....or a clutch centre nut...230Nm. Almost broke out in a sweat this afternoon doing mine.
     
    #5 RickyX, Mar 13, 2016
    • Like Like x 1
  6. It's 190Nm, not 230.
     
    #6 jusutus, Mar 13, 2016
  7. 1098R workshop manual says 230 to 250.
     
    #7 RickyX, Mar 14, 2016
  8. Thought you were talking about 999. 1098R has an M25 centre nut (999 is M20).
     
    #8 jusutus, Mar 14, 2016
    • Agree Agree x 1
  9. Yes, apologies for misunderstanding.
     
    #9 RickyX, Mar 14, 2016
(You must log in or sign up to post here.)
Do Not Sell My Personal Information