Can anyone help me please? Got myeslf a Sigma 48T slipper clutch, instructions are ok but not brilliant. There are 2 bevel washers, one goes on top of the "top hat" the other goes underneath the "octopus spring". Which way should the bevel be?
There is an exploded picture here which might be of use. STM Slipper Clutch STM Clutches STM Clutchs Slipper Clutch Andy
Thanks Andy, the STM is slightly different in the way the Sigma is assy, it seems to show a similar bevel washer (item 10) but I cant see which way its pointing
If you call them, they are incredibly helpful. I had some issues with the setup for an air-cooled DS motor which had one fitted. Rang them up and it turned out to be Neil Spaldings old bike. Spent half an hour discussing it with him , he diagnosed the problem on the phone and sent me the bits I needed. Received an email from him to check everything was OK. Excellent people.
When i spoke to Sigma at the start of the mouth they were going on shut down as there testing with MotoGP. If you have a good look at the pictures you'll figure it out!
