Hi all,l i just acquired a pair of Termi slip ons for my 916 but they came without the strap hangers ,the stock ones are too loose, anyone know where i can get a pair to fit?...i have fitted them in the interim by packing them out with strips of rubber matting cut to size ,not ideal but better than nothing until i can get the right bits.
I may have hangers without the rubber. Not sure will fit termis but pm me and i can measure the internal diameter and let you know
Just ordered a pair of under seat strap hangers from Pipewerx, 35cm circumference and they fit the Termi cans perfectly, and are a quality alternative to the Termi items.
The 748SPS came with standard exhaust and Termis, which If the same diameter as yours might help as the straps have a part number and may still be available. If you can acurately measure the circumference I could check the ones I have and if the same, the following part number may be helpful ('Strap Carbon silencer' 57610191B). There is no specific part number for the rubber, but I think they use the standard exhaust rubbers (78810481A 'Gasket'). I checked at the beginning of the year and the rubbers were still available but not sure about the Straps. Hope this makes sense.
