Hi, can anyone help me out with some torque settings for a 2012 1200s (ohlins) please? Just has a fork seal done so need to put it all back together. I need torque settings for top yoke, bottom yoke, brake calipers and front axle. Thanks
Front fork Bottom yoke terminals M8x1.25 16* GREASE B:sequence 1-2-1 Central tightening screw on steering head M8x1.25 18* GREASE B Front pipe grommet to steering base fixing screw M6x1 10 Handlebar on head stud screw M10x1.25 45* LOCK 2 Handlebar U-bolts fixing screw M8x1.25 25* Marzocchi fork end terminal fixing screw M6x1 10* Sequence 1-2-1 Öhlins fork end terminal fixing screw M8x1.25 19* Sequence 1-2-1 Splash guard to steering base fixing screw M5x0.8 3 LOCK 2 Steering bearing ring nut M35x1 30* GREASE B: sequence 1-2-1 Steering head terminals M6x1 10* GREASE B Steering limit switch register lock nut M8x1.25 18 LOCK 2 on thread nut only Front wheel Disc and phonic wheel to wheel fixing screw M8x1.25 25* LOCK 2 Front wheel shaft nut M25x1.25 63* GREASE B on the undersides of the head and threaded pin Front brake ABS control unit bracket fixing screw AF5 3 ABS sensor fixing screw M6x1 10 ABS tube cover on electrical components housing fixing screw AF5 3.5 Front brake fluid reservoir to hand guard fixing screw M5x0.8 2 Front brake master cylinder terminal M6x1 10 Sequence 1-2-1 starting from upper screw Front brake caliper pre-tightening M10x1.25 2 Front calipers fixing screw M10x1.25 45* GREASE B Hand guard to pump fixing screw M6x1 10 Hand guard to terminal fixing screw M5x0.8 5 Throttle twistgrip fixing screw M6x1 10
