V4 V4 Clutch Not Fully Disengaging

Discussion in 'Panigale' started by Lowdown, Aug 25, 2020.

  1. just fitted duca clutch cover and asv levers, but now for some reason the clutch is not fully disengaging since the clutch cover and levers have been fitted, i bleed slave and master cylinders but the problem still stands i took everything off to double check and everything seems fine
     
    #1 Lowdown, Aug 25, 2020
  2. Have you tried refitting the original clutch lever to see if it makes a difference ? Andy
     
    #2 Android853sp, Aug 25, 2020
    • Like Like x 1
    • Agree Agree x 1
  3. Agree above... either something not aligned properly! Did you fit the pressure plate or just the cover? Now you can see inside the clutch is it operating as it should? When you engage it should be pushing the plates apart....
     
    #3 Dave dunlop, Aug 25, 2020
  4. standard lever same problem the plate is sat in correctly it just does not seem to fully disengaging
     
    #4 Lowdown, Aug 25, 2020
  5. Then the only other part you have changed is the cover. Is the clutch itself rubbing the underside of the cover ? Andy
     
    #5 Android853sp, Aug 25, 2020
  6. fixed I had to slack the pressure plate off a turn
    No it does not seem like it
     
    #6 Lowdown, Aug 25, 2020
(You must log in or sign up to post here.)
Do Not Sell My Personal Information