After 6 months and 5K miles I fitted an R&G tidy as I was fed up with the crap collecting in the very complicated OEM plate holder and the Side plate light. The R&G one seemed best for me in terms of simplicity and still providing some protection for the back of the bike, easy to install - I didn't use the bullet connectors provided but shortened the wires and made solder joints and then shrink wrapped them - not a lot of space in the tail section. I also made up a bracket for the plate to hold the reflector as well. I should add that Ducati don't recommend fitting Tail Tidy's as it may affect the rear radar, with the R&G unit fitted the rear radar / blind spot detector on mine works just as before, no issues at all.
Anyone know if the tail tidy will allow the fitting of the Ducati LED indicators? As mine were fitted from new I'm not sure if the stems are the same.
Have seen this , and someone posted a video of one fitted , can’t find it now , it also had the ducabike clutch cover on (yuck) , I’m waiting for the Evotech one . Thanks for posting it
Well I've been told probably have to wait for first service. (Took evotech months to sort one for streetfighter). Just hoping dealer gets the rest of my bling sorted pre delivery march
They've designed and tested it, so it shouldn’t be too much longer. We’ll see over the coming weeks I guess.
Had an email convo with Evotech today. The tail tidy is around 5 weeks away. The exhaust hanger (pillion peg delete) is in development, and they're working on the engine guard (to cover & protect the front of the bike). Frame sliders are a possibility, but not guaranteed yet.
Any pictures of the Evotech on a bike or only the CAD drawing ? Quite like the look of the CNC Racing one !
