1260 Vehicle Hold Control

Discussion in 'Multistrada' started by Itsik Dayan, Mar 17, 2021.

  1. My multistrada 1260s 2018 after rear brake fluid replace the VEHICLE HOLD CONTROL in hil doesn't work
    I push the front brake and the H light comes on but the brake doesn't locked
    The rear brake have no air in the system
    Its works good
    Only the VHC doesn't work
    Any one know about this problem?
    The bike havr 60k kilometer after desmo service
     
  2. Welcome. Someone will be along soon that will be able to help I’m sure.

    But in the meantime why don’t you introduce yourself properly in the newbies section too :)
     
  3. Does it work if you activate VHC with the rear brake?
     
    #3 Edward Cunliffe, Mar 18, 2021
    Last edited: Mar 19, 2021
  4. Its works if i push hard the front brake Or the rear brake
    But if i move the bike in the hill its doesn't locked the brakes
     
    • Like Like x 1
  5. How’s about using the brake?
     
  6. The rear brake works very good
    No air in the system
    I replaced it in the service with motul rbf660 dot 4
     
  7. Try a firm stamp on rear brake & release, on a slight incline or decline.
     
  8. Strange. I assume VHC is linked to the ABS in some way. No ABS errors?
     
  9. No abs errors
    Maybe the update makes the problem?
    He did a update after the service
     
    • Like Like x 1
Do Not Sell My Personal Information