1200 DVT Givi Outback Trekker Pannier Option

I have the 37l on my dvt pp. works well but a pain with the rear shock adjuster

 

Do you have one of these fitted?

 

that's for the 950 and doesn't fit, i've made something similar

 

It might be for the 950 but I can confirm that it fits perfectly (2015 MTS 1200 with manual suspension - so expect it also to work with the Pikes Peak manual adjuster but cannot confirm that 100%. I'd be surprised if the mounting was different on the PP but granted it is Ohlins on that bike). Invisible solution unless you know it's there and moves the preload adjuster fully clear of the pannier rack.



That's the preload set to max, BTW... it comes about 1/2" further out when set to min.

 

Also added the Givi toolbox to the LH pannier frame. Handy little thing and looks neat, tucked under there.

 

I got it to fit in the end with a little filing here and there

 

Perhaps it is because of the Ohlins. I'm very happy with it.

 

Hi, does anyone know if these work with the Termignoni exhaust. I have asked the importers but they weren't sure.
Thanks in advance
Nigel

 

Mine has the termi end can and works perfectly.

 

hi, just seen this and wondered if this was on a 1200s as Givi only list a tool box fitting kit for the enduro model ?
I wondered if you had any clearance issues with the single sided swingarm on the S ?

 

It looks like the indicators could well be in the way

 

I have a base not an S but there’re no clearance issue. Fits perfectly. You need the fitting kit for the pannier frames you have. The enduro frames are by Touratech.

 

Recent pic of it all laden. No indicator clearance issues or any clearance issues. Good kit.

 

Thanks for that yeah I know the OE Enduro frames are different but Givi do a cam lock set up for the Enduro
I’ve only seen the Enduro tool box mentioned and assumed it was the difference between traditional and single sided swingarm
Good info thanks again

 

I originally got the universal tool box mount and that was no good. It mounted it in a way that conflicted with the indicators. So worth getting the correct mount, rather than doing what I did and just going for the one that'd be delivered first...

 

By clearance issues I just meant access to the tool box. The standard indicators are quite large.

 

Yeah, that's really quite adequate to get into the toolbox. The lid just pops right off and I have plenty of room to slide my stuff in and out of it.

 

Picture is a bit crap but the best I think I have, you can see there's good clearance.