Cleaning Filthy Brembo Goldlines

Discussion in 'Detailing and cleaning' started by Messer, Mar 3, 2020.

Page 2 of 5
  1. I would be very handy @rob lewis if you could put a list of recommended products and there uses together and post it in the Detailing and Cleaning section, then perhaps @El Toro could make it a sticky ( I think that's what they call it) so it stays at the top, it's just a thought, we all find your input very helpful and informative.
    Steve
     
    #21 Birdie, Mar 5, 2020
    • Agree Agree x 3
    • Like Like x 2
    • Thanks Thanks x 1
  2. SDOC100. Works a treat.
     
    #22 duke63, Mar 5, 2020
    • Agree Agree x 1
  3. I have SDOC allready as I swear by the stuff, Wonder Wheels, and now Bilt Hamber Autowheels. I will revert back with some pics, as these are grotty as hell!
     
    #23 Messer, Mar 5, 2020
    • Like Like x 2
  4. Okkidoki guys and @Birdie ....thanks for the recommendation....I'll defo do this for everyone once I have the time...
     
    #24 rob lewis, Mar 6, 2020
    • Like Like x 7
    • Thanks Thanks x 1
    • Useful Useful x 1
  5. Just seen this....if its 10 years baked on then if BH AW does not work ( after multiple hits ), then KKD Dragons Breath should do the job.....we've only used this stuff twice on really F**ked wheels with great success....
     
    #25 rob lewis, Mar 7, 2020
    • Useful Useful x 1
  6. Dishwater tablets
     
    #26 evoarrow, Mar 7, 2020
    • Like Like x 2
  7. If you use Gunk make sure you remove the brake pads first.
     
    #27 jamesgarnor, Mar 8, 2020
  8. Do you use the ‘Intense’ setting, or can you leave the machine on ‘Eco’?
     
    #28 Darkness, Mar 8, 2020
    • Funny Funny x 1
  9. 'Sense' is best if you have it :thinkingface::D
     
    #29 Harry Bell, Mar 8, 2020
    • Like Like x 1
  10. If not, does that make you Senseless, or Insensitive? (Asking for a friend).
     
    #30 Darkness, Mar 8, 2020
    • Funny Funny x 1
  11. Whichever the wife left it on!!:upyeah:
     
    #31 Birdie, Mar 8, 2020
    • Like Like x 1
    • Funny Funny x 1
    • Agree Agree x 1
    • Useful Useful x 1
  12. Managed to get one done, but the other needs another go as it’s really baked on!

    this was with a combination of autofiniesse eradicate, wonderwheels and sdoc100. The sdoc did the bulk of the shifting though. Will wait to test out the bilt hamber on the remaining bits of the last calliper,

    AE76C905-944E-451E-B6DC-CB70E1878BC7.jpeg

    E5F2CB47-7EDF-4603-8282-BFB9491FED72.jpeg

    6FC0B547-E72A-4245-87A2-A405B02DC1C9.jpeg

    EF8197C0-1372-40FE-9524-EB139528F9ED.jpeg

    0EAE9465-4B8E-411E-9A85-AFA2193DA7F1.jpeg

    2C5ED3C2-B140-4F1B-8040-48336F8ED000.jpeg

    008313F2-ED9B-4CC5-B9D6-98B4E3153615.jpeg

    9DE7D946-873F-4FD9-ADF5-0F617EA363B1.jpeg
     
    #32 Messer, Mar 8, 2020
    • Like Like x 12
  13. Good job mate, that’s come up lovely. Very interested to hear how you get on with the Bilt product. I have the same job on my to do list in my project.
     
    #33 Expat Jack, Mar 8, 2020
    • Like Like x 1
  14. Those fork bottoms have seen better days.
     
    #34 deleteduser211220, Mar 8, 2020
  15. Thankyou for the update images.
     
    #35 GunZenBomZ, Mar 8, 2020
    • Like Like x 1
  16. Not too bad now they are cleaned up. The bike is just pretty filthy, it’s been sat 10 years
     
    #36 Messer, Mar 8, 2020
    • Like Like x 1
  17. Good job!
     
    #37 Jez900ie, Mar 8, 2020
  18. Very nice.
     
    #38 Birdie, Mar 8, 2020
  19. Won't matter so long as the wife's out.
     
    #39 Hughdg, Mar 8, 2020
    • Funny Funny x 1
    • Agree Agree x 1
  20. Does anyone know the thread size of the bleed nipples for these?
    I looked about and found a size, ordered them but they are too small.

    this is what I ordered

    FA388943-23BF-4EFE-84F8-8E99B4E1B8C2.png
     
    #40 Messer, Mar 8, 2020
(You must log in or sign up to post here.)
Page 2 of 5
Do Not Sell My Personal Information