998 My First Duke :)

Discussion in '748 / 916 / 996 / 998' started by Bobagoat46, Feb 18, 2020.

  1. I think the lacquer is to protect it from petrol and the like.
     
    • Like Like x 1
  2. Doing this today.....
    Replacing knackered rubber boots on connectors.
    Patience, patience, patience....
    Nothing much else to do tbh:mask:

    8E08C302-5661-4BF0-ABAE-1F79EB6B3BF5.jpeg
     
  3. Took tank off today and the male quick Release coupling snapped, brittle as.
    Fortunately I had bought a replacement pack.
    Also replaced another connector boot.
    Perished.

    A8E63842-FBF6-48BC-A370-90A60CF521CD.jpeg

    489E0F00-33D9-4879-A977-127A39F217AE.jpeg
     
    • Like Like x 3
  4. Finally managed to get her to garage for belts and bearings service:mask::mask:

    IMG_6738.JPG
     
    • Like Like x 6
  5. Had a few teething problems with her...
    Gear lever was in wrong position, so was a barstool to get into first.
    Indicators stopped working on way home, after investigation in man cave, it turned out to be a snapped wire on the flasher unit.
    Gear lever adjusted.
    Sorted:upyeah:
     
    • Like Like x 2
  6. Easy to do lockdown with a bike like that to tinker on and get it peachy
     
    • Like Like x 1
    • Agree Agree x 1
  7. Bob, did you replace the boot on the atmospheric pressure sensor on the rhs of the header tank by the steering damper. That one allows water into the sensor connector when the rubber is perished and the water will sit around the connector pins causing odd running and cutting out issues particularly when it is hot. The reason it is turned back on itself and then tied that way is it is a known issue. Separate the plug and have a look in the socket and you will see where the water sits.
     
    • Useful Useful x 2
  8. Apparently the 998 doesn’t have one on the coolant reservoir with a bit of researching on the tinterweb.
    I did wonder what the three holes were for though:thinkingface:
     
  9. Ha Ha, a better solution than bodging the electrical connector wiring I think
     
  10. Wow!... she looks amazing mte.. you’ve done such a quality job... WD

    is it not an S then? I know from OP it was a BiPo, not sure perhaps they only made S models in mono postos ??

    X
     
  11. Thanks
    Its a Biposto but I've managed to get hold of a Monoseat for it whilst on lockdown and then the spending begano_O
     
  12. The Termis are rather raspy...my missus knows when I'm on my way home:cool:
     
  13. The other night at half midnight there was a police helicopter buzzing around our road. Last night on “the clap” the girl over the road said she thought it was me on the bike. It was only when she looked out the window she realised.
    Note to self. Try and keep the noise down a bit.
     
    • Funny Funny x 3
    • Agree Agree x 1
  14. Yep if I was coming home from work very early hours as I entered our street I’d hit the kill switch and I could just about get to mine free wheeling just to avoid issues with the neighbours etc.. X
     
    • Like Like x 3
    • Funny Funny x 1
  15. Hello were do you get your couplings from thanks Anthony
     
  16. Try @Exige on here, iirc he supplies them and there’s a Forum discount for subscribers.
     
    • Like Like x 1
  17. I’m out of stock of males, I have plenty of females :bucktooth:

    in fact I have 2 male connectors left too but not listed on EBay :upyeah:

    Metal ones are worth the extra though imho
     
    • Funny Funny x 1
  18. He's always got plenty of females :D
     
Do Not Sell My Personal Information