What did you just buy for your bike?

Discussion in 'Ducati General Discussion' started by stuzinho, Apr 12, 2012.

Page 46 of 159
  1. Oversize carbon air ducts and carbon radiator guards for the Streetfighter S

    IMG_0472.jpg

    IMG_0472.jpg
     
    #901 Robarano, May 25, 2013

  2. Where did you get these from?
     
    #902 Gregory, May 27, 2013
  3. #903 Spareparts, May 27, 2013
  4. Do these weights help reduce vibration? My right hand goes all pins and needles if I sit at a steady speed for too long. Like 40-60 mins on the motorway and I have to pull over to let the circulation sort itself out. :frown:
     
    #904 andyp79, May 28, 2013
  5. Yes, they do help quell the really high frequency vibes. In fact it has highlighted the vibes coming through the rest of the chassis as the handlebars are now less buzzy. I haven't ridden it for an hour at a constant speed though so can't comment on whether your problem will be solved. At only £20 they also look much better than the cheap plastic caps, and offer more protection should the bike go down.
     
    #905 Spareparts, May 28, 2013
  6. This should sort my problem then, they sound like a good bet for £20. To be honest, the cheapy plastic stock ones are a bit of a detail to let down are they not? I would have thought that a twin would need heavy weights, not non-existant ones. Weird.

    Anyway, I'm off to order them. Do these fit an 848 do you know? I don't know the size until I get home to measure them.
     
    #906 andyp79, May 28, 2013
  7. I'd like to think it was Ducati in the 'pursuit of lightness' :smile: I think the 848 and 1x98 have the same diameter bar ends. One tip: I spray painted the bolts with Hammerite black paint before installation as the ones supplied are shiny stainless. But these really should have been standard fitment imho.
     
    #907 Spareparts, May 28, 2013
  8. £20 is a steal for an Oberon part! :eek:
     
    #908 Nelson, May 28, 2013
    • Like Like x 1
  9. Yip, I thought it was weird that they'd shown a stainless bolt in the pic. Bit weird cutting that corner!

    Will get them ordered up just now. Cheers. :smile:
     
    #909 andyp79, May 28, 2013
  10. Thanks, ordered.
     
    #910 Gregory, May 28, 2013
  11. titanium nuts and bolts
     
    #911 Phill, May 28, 2013
  12. A tiny wee number plate :rolleyes:
     
    #912 big thumpa, May 28, 2013
  13. Slip 'er one...:smile:

    [​IMG]
     
    #913 Nelson, May 29, 2013
    • Like Like x 3
  14. fucckinell about time haha
     
    #914 Phill, May 29, 2013
  15. Italian post mate..:wink:
     
    #915 Nelson, May 29, 2013
  16. A set of wets...
     
    #916 bradders, May 29, 2013
    • Like Like x 1
  17. ^^^^same here. And a 46mm socket.!
     
    #917 abmatt2002, May 29, 2013
  18. 3x black plastic number plates nuts & bolts to put where the hideous monstrosity of a splash guard was attached.

    Hey big spender.
     
    #918 DukeXTC, May 30, 2013
  19. Not bought yet, but I think I'm about to order some Stomp Grips. Had tried to go without, but I really miss them after having them on the GSXR, will just have to put up with the looks I guess!
     
    #919 andyp79, May 30, 2013
  20. Hey Andy, if you're not keen on the looks of StompGrips, try the TechSpech Gripster tank pads. I have the C3 ones on my 999 and they suit it well. They're shaped to fit the tank and are available in three different textures...

    Techspec Gripster Tank Pads...

    cheers,
    Dom
     
    #920 domRusty, May 30, 2013
(You must log in or sign up to post here.)
Page 46 of 159
Do Not Sell My Personal Information