I have a routine which involves a warming and soaking sequence so the engine is run up to full operating temperature in about 30 minutes. It's the same routine I was shown to prep my track bike for the first session of the day. Served me well. Andy
Start the bike, (apart from the R6 and the NC29 which have manual chokes) the bikes have a cold start high tickover so I don’t touch the throttle. Leave it ticking over until the water temperature hits about 65°C, then turn the engine off and let soak at that temperature for about 10 minutes. 2nd start, let the temperature get up to about 80°C using tickover and a few more revs say up to about 3000rpm then turn the engine off and let it soak for about 10 minutes again. 3rd start, let it warm up until the fans kick in, using a rise and fall of revs (not blipping the throttle) probably up to about 5000rpm. Once the fans switch off, turn the engine off and leave it to soak for about 30 minutes. Sometimes that’ll be it but on the odd occasion, I might start the bike one more and let it tick over but only until the temperature gets to about 75°C. Doing the 4 bikes, I staggered the sequence so it only took me about an hour, maybe 15 minutes more. Once the bikes were cool to the touch, they got put back in line, battery maintainer hooked up and then covered. Only decided to go through the process today because we’ve not ridden since before Christmas. The Monster is off down to MR tomorrow for its new Nitron suspension and I wanted to make sure everything is okay and it is sweet as a nut, started on the button. The Multistrada and Scrambler will be out at the weekend for IAM RS observed rides so wanted to make sure again everything was okay and it was. The track Multistrada hasn’t any action since September so it got put through a few paces on the Spanish 5% fuel still in the tank. All 4 bikes have inhibitor in the fuel so it’s good to push some fuel through the pump and the injectors. Andy
Ordered a new clutch lever and replacement folding Brembo brake blade for the track bike in preparation for Spain in March. Just in case
was dithering over going for rearsets (bonamici) for v2 or just some carbon heel guards - finally decided the riding position is pretty bang on for me as is so ordered the heel guards (just hate the silver Ali ones they come with).
I have a fair bit of carbon on mine now inc the heel guards. Eventually I will put on Spider rearsets. I like the pegs a fair bit higher being a shortarse.