I do have the manual now I come to think of it. Now why didnt I check that instead of the user manual ffs? Wonder how much the tool is from ducati? I think I can change my preload as Im 78kg all leathered up, Pretty sure my fork gap at bottom is 30mm or so despite heavy braking at Almeria...
Happy to print one out and see if it holds up. I’ll scan my V4S electric fork top tomorrow and see if I can make one, just in case anyone else needs one.
I would love to have the schematics DRR117 to have one made at a mates with a 3D printer. Its a 32mm socket basically. Been looking for days online havent found anything. Sorry should mention for the Ohlins front fork on the 2022 V4 S
Just taken delivery of a 32mm plastic ring dpanner from ktech as per livewires suggestion. 20sobs. Next day del from ktech. Noice.
When I get the file into CAD and printed / tested I’ll send the STL over so you can print it on your mates printer
not the most exotic looking of prints but does the job. Also have one for a 1/2” wrench printing aswell. It fits and turns the preload without disintegrated so that’s a start. Only 40% fill, just under 2 hours to print.
