848 / 1098 Modifications - what did you do ?

Discussion in '848 / 1098 / 1198' started by Dubs, Jul 31, 2013.

  1. Mice to see some modding to make the bike better as well as prettier/blingier
     
  2. re oiled forks and set up suspension, 1098r footpegs ( old ones slippy and dangerous ),db screen ( to much buffeting ) ,termi cans,dp ecu,( balanced throttle bodies and reset tps for smoother running low down ) and to look good black lower fairings,white number boards rear and front, carbon chain guard,cardon heat shield,slightly smaller number platte and a rather handsome modest rider on top.


    edit carbon tank guard, carbon hugger, new fork springs.
     
    #42 idrinkbeer, Mar 30, 2014
    Last edited: Apr 19, 2014
  3. Mods so far:

    Wanted to leave the 1098R external appearance pretty much as standard, but mod everything else.

    Akrapovic Evolution full 70mm titanium exhaust system with carbon fibre end cans
    Ducati Performance clutch cover and titanium clutch springs (Soon to be changed for EVR clutch
    Superstock custom map for ECU
    Ducati Performance double-bubble screen
    Stainless steel fairing bolt kit
    Stainless steel fairing screen bolt kit
    Stainless steel front fender bolt kit
    Stainless steel seat unit bolt kit
    Stainless steel fuel cap bolt kit
    Stainless steel front brake calipers mount bolts
    Titanium rear brake caliper mount bolts
    Titanium rear brake caliper pinch bolts
    Titanium speed sensor retaining bolt
    Titanium DTC sensor retaining bolt
    Titanium subframe nut and bolt kit (Special items - WSB style from Giamoto)
    Titanium rearset bolts (Special items - WSB style from Giamoto)
    Titanium Hex nuts to sprocket flange (Lockwired)
    Titanium front brake disc mounting bolts kit
    Titanium rear brake disc mounting bolts kit
    Titanium fork axle pinch bolts kit
    Titanium front axle nut
    Titanium ride-height mounting bolts kit
    Titanium shock absorber mounting bolts kit
    Titanium rear hub/axle pinch bolts kit
    Titanium steering damper mounting bolts
    Titanium rear brake master cylinder mounting bolts
    Titanium exhaust shield bolts
    Titanium hugger bolts & rubber anti-vibration mountings
    Titanium exhaust can mounting bolts
    Titanium battery clamp retaining bolt
    Titanium top and bottom yoke pinch bolts
    Titanium heel-guard bolts
    Titanium chain-guard mounting bolts
    Titanium numberplate spider retaining bolts
    Titanium engine bolts kit
    Titanium Sidestand fixings kit (all the mounting bolts and special fixings)
    Billet aluminium sidestand in silver (Not fitted yet)
    Chrome-plated sidestand bracket
    Stainless steel nuts for numberplate/indicators hanger
    Stainless steel oil cooler hanger bolts
    Stainless steel rear brake reservoir mounting bolt
    Stainless steel seat-pad mounting bolts
    Stainless steel fairing black inner panel bolts
    Stainless steel fuel tank mounting bolt with washer
    Hi-Cap starter circuit wiring upgrade kit
    Numberplate bracket in Polycarbonate - Cheaper than a tail-tidy and does the same job
    Saxon Seats cover for riders seat pad
    Beater 20litre aluminium hand-made fuel tank (Posted yesterday - should be with me soon)
    Custom paint-spray job to aluminium tank (When the tank arrives!)
    Corse Dynamics billet fuel pump base
    Corse Dynamics billet fuel tank mount bracket
    CDT Carbon fibre front fender
    CDT Carbon fibre key-surround
    CDT Carbon fibre undertray (Awful to fit - never again!)
    Heat-shielding to undertray
    Heat-shielding to bellypan replaced with high-grade aerospace product
    Oberon clutch cover
    Brembo SC front brake pads
    Brembo SP rear brake pads
    Supersprox rear sprocket in gold - 42 tooth
    DID ZVMX X-Ring chain with 100 links (Bit longer to compensate for larger rear sprocket)
    Billet sprocket flange in black
    Billet ride-height adjuster in gold
    Motocorse billet aluminium rearsets with reverse gearshift action (Currently on order - ETA July 2014)
    Motocorse aluminium frame plugs kit (Not fitted yet)
    Brembo HPK rear brake master cylinder with 13mm piston
    Brembo RCS front brake master cylinder with titanium pinch bolts
    Brembo RCS clutch master cylinder with titanium pinch bolts
    Motocorse billet reservoir pots for front brake and clutch master cylinders
    Superbike “Squishy” grips
    HEL Brake & clutch lines; Transparent red with “Stealth” covering to black stainless steel fittings
    Oberon clutch slave cylinder
    EVR Slipper clutch (Being fitted next week)
    Titanium black banjo bolts & bleed screws

    IMG_2091.JPG
     
    • Like Like x 6
  4. El Toro sticker on the screen, Ducati tank pad and a carbon rear hugger. Looks the bollox :upyeah:
     
    • Like Like x 1
  5. Took the motor out and put it in a 748 chassis,
     
  6. All pretty much standard then!
     
  7. I've been tinkering with mine since I got it in Sept last year, did most of the stuff over winter.

    Full bodywork swap to EVO dark and the nose cone from an Corse SE, the nose gets swapped to an oem version for track which has had the lights plastic welded and painted to match the evo dark (Halfords satin black with no lacquer :Bag: ) with home made white number board and WSB style headlight stickers
    Oberon clutch slave
    Carbon front mudguard
    Carbon Mirror covers
    Black Oberon foot pegs
    Carbon heel guards
    Carbon exhaust heat shield
    Carbon hugger
    All in one tail light
    Quick release number plate bracket
    Ducati Performance Filler Cap
    Termi slash cuts, filter, ecu
    R&G crash protection - forks, rear spindle, under panel frame, bar ends
    Evo tech folding adjustable levers - full size
    Full gb racing casing covers
    Ducati Performance Race Seat
    Custom red decals
    Rear number plate boards
    Red pin striping to wheels
    Clear stomp grips

    I think that's it !

    Some pics.

    [​IMG]
    [​IMG]

    [​IMG]

    [​IMG]
     
    • Like Like x 6
  8. I just added a motografix numberboard...trackdays, noticed a few extra chips ( got two bubbles halfway down underneath two middle screen screws on opposng sides fo the nose cone, i think i didnt heat that section enough !! arrghhh, not bad though )

    Im reluctant to put money into it at the moment. Its already quite perfectly good bike..

    Im torn to buy an 848SE, evo or 899....I have a feeling I will be still in same position a few months down the road.

    [​IMG]
     
  9. Custom map added by BSD a few weeks back (SO much improved) / new belts.. R1 throttle tube fitted / new red black progrips too.
     
    • Dislike Dislike x 1
  10. New set of clothes for my 1098

    [​IMG]

    I think I like it
     
    • Like Like x 2
  11. I like it..... You getting the fairing glossed up like that tank?
     
  12. Nope gonna wrap the tank in Matt, I've got a roll of wrap just not got the balls to do it just yet :)

    Yep I like it to now, say a pic on the net of a Matt black 1098 with red frame so I thought I want one of those 2... Don't look the same as the pic, but overall pleased with the cheaper option to convert
     
  13. @Old Jock has the same in gloss, I do love the black / red frame contrast:upyeah:
     
  14. I'm ashamed to show mine after that bugger Fastmonkey posted up pics of his

    I love the white number board and the red lettering on the tank.........................now a bigger CF tank with red lettering mmmmmmmmmmmmmm.
     
  15. Cheers Old Jock, I'll pop another one up for you ;-)

    [​IMG]
     
    • Like Like x 3
  16. Really well done sir minimalist modding yet to my eye then bike looks stunning

    An awful lot (probably me included) have thrown more cash at the bike and not achieved anything as tasteful
     
  17. Too kind............ I want to see yours though ?

    Here's the last one so you can see a different angle.

    [​IMG]
     
    • Like Like x 1
  18. I notice several people have the oberon clutch slave cylinder.
    how do people rate this mod?
    I'm finding the clutch on my 848 quite heavy but want to go back to standard length levers from the shotes first before I look at other options.
     
  19. I've just nicked that photo to add my bike collection photies.

    I'll drag out my excuse for a Ducati tomorrow so you can all hav a larf

    John
     
  20. tank protector and that all I am doing :p
     
Do Not Sell My Personal Information