Separate names with a comma.
Datatool in my experience are a pain. Meta systems seem to tick all the right boxes though and I think are cheaper too. I remember a youtube video...
Or you could just clean you're main earth and starter motor connections with a fibre glass pen or emery paper for a couple of quid. I can...
Just take the relay in with you. Like you would if you needed a bulb. It's not a specific bike part.
Well. You can't ask for more than that can you. Should transform the bike. And it's purple :upyeah:
Oooooo thats a lovely colour. I nearly bought a Hyprepro cos of it's colour but didn't know maxton used the same. Is there any adjustment other...
As above correctly set suspension will let you enjoy the sublime chassis. As for starting I can't see why people have so many issues. In 20 years...
I used my R1 to commute, tour and track. All lights on it, everything. Did a few mods for the track but so long as you remember it's just a track...
LUBE THE SWINGARM PIVOT! Most people never need to take this out. But if you need to, and it's seized, which they do, I've heard all sorts of...
Great write up. Had them build my 996 properly years ago. Comfortably over 150bhp and around 90lb/ft. Buttery smooth drive and anyone getting to...
Not another poor showing from a Ducati dealer. I think if I ever decided to buy new again it'd be from Nelly at Cornerspeed. Don't even know where...
Well, I don't want to be pointing out the obvious, but it'll be a 12 volt battery. Most when fully charged hold around 12.5V. The higher reading...
Well I've got my TL1000 as a road bike. Not mental power like newer stuff, strong and reliable, cheapish to buy and keeps me in the v-twin groove...
Tried it a few years ago but I've go no natural talent and was finding I spent the first half day learning to ride again. Everyone's different but...
13.7 will be from the alternator. Unless the 12v socket stays live when the engines off I can't think what wouldn't caused the problem. All...
To reduce any confusion Gary. Long and short of it is you should be using a 190/50. That's what the factory recommend so that's what to use....