Separate names with a comma.
I have a 2016 M1200R that I bought to replace a 2015 Monster 1200S because I found the suspension too soft on the S model. The R was better but...
I know this is an oldish thread but to go back to the original post, the Monster 1200 R is continuing for 2019 unchanged (I work at a Ducati...
The FL9110 dont have enough damping, I ran with the rebound screwed all the way in and it was still no where near enough. I spoke to Steve Jordon...
Wilf's wrong about the cams, 2016 S and R both have the same cams, intake (P/N 14823431B) and exhaust (P/N 14823451B). The 2016 R had larger 56mm...
You're welcome, pleased I was able to help.
Ironically one of the reasons I changed my S to the R was that the Ohlins forks on the S were too soft on the damping for me. Now I've go the R...
You wont need to wind it off, just wind it up until you get 12mm of thread exposed above the lock rings.
The R shock isnt longer than the S, the seat is higher on the R as it has a differant subframe to the S. I ran my old S with the higher comfort...
The M1200S has a DU1081. For referance the M1200R has a DU1090. Both are fitted with a 01092-41/115 (115nM) spring. I'm actually reducing the...
Ian, the spring I've ordered is softer not shorter (Nm not mm). Ducati havent changed anything in the suspension to increase ground clearance...
I now have an R after changing my S for one. The rear is hard on the R, although the spring is the same as the S it feels much harder so I've...
If the bike is reaching 85C stationary in traffic but cutting out on the side side I would suspect its either the side stand switch beginning to...
Dont panic! The fan should be kicking in somewhere around 100 to 105 C. From memory the fuse is in the little rubber box that sits on the side of...
Phil, you just need to remember we read the forums too. I'm not trying to justify anything and do try to say hello to everyone that walks in so...
