Separate names with a comma.
As close as you can get to 99Hz its a bit tricky, if using the Gates app, do it somwhere quiet, even passing traffic was sending waves to the...
Check this out, had all kinds of hell finding the noisy culprit on my 748S.... https://www.ducatiforum.co.uk/threads/a-whirring-748s-engine.63116/
Thank you :upyeah:
Its really great to be out and about again on this bike :-) [ATTACH] [ATTACH] [ATTACH]
18000 +/- miles however quite a few premature failures have been reported, some say due to mains being over shimmed, and even from the factory,...
Thanks for that, well I'm a bit old at 67 with a weak back, so had to have a good plan. Well when it was filled with oil, it was buzzed over with...
Thanks for your comments, no I am sure the clutch bit was not at fault, and really surprised that did not cause any other issue. The previous...
Record the mileage (recent clocks), and the finished item :) Thanks for the tips from within this forum, and a special thanks to Bikeboy and...
Getting the engine back into the frame. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Thanks for that mate, well most likely look at a crank regrind or a replacement engine. Anyway, getting there now [ATTACH]
Now ready for the next stage of the rebuild[ATTACH] [ATTACH] ....
To-day was a good progress day..... [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
New Blue big end shells and screws installed to-day. [ATTACH] New shells degreased and installed in rods and caps, ready for clearance check...
Geordie
My big end bits arrived to-day so I can get started on the engine rebuild, funny though, according to the description on the packet label, I am...
