Separate names with a comma.
110Hz if using that method
Thanks for the interesting conversation. I'm no wiser but will probably use the way I'm used to and pop the pistons in first and cover the hole in...
Just a quick question for the engine builders. When fitting the pistons into the cylinders, do you: a) compress rings on pistons, fit piston to...
I rode my Pantah on Sunday. About 230km of sweeping roads. I find that above 4000 rpm the gearbox changes smoothly and effortlessly, up and down...
Yep, sorry about that. I don't think the exhaust valve creates the flatspot but it definitely kicks in mid-range. I've deleted my servo motor and...
I'd go the other way for sure; change down an extra gear and use the top end of the rev range out of the corner. Your 848 Evo should have a...
I almost did that too once. They are one of the few plugs in the same area that are the same.
A simple photo of the side of the head is all you need to determine
I swapped my rear from a 38 to a 41. The bike rides much better and i use 5th gear a lot more now. Top speed is limited to around 160/165 km/h and...
You might find ST2 and Monster cables are the same but longer. If you need a longer cable have you customised something?
Do you mean the little side lights? They just pull out but are usually stuck tight.
There is nothing special about those screws. Standard self tappers. Take one out and go to a hardware store. You may be able to get them in...
Orange warning light will illuminate with key but will go out after starting if there is no issue.
That's perfectly normal and the same feeling I get. When you have the slightest pressure on the lever, when the slipper action is even a tiny...
