Separate names with a comma.
Thanks to every one clutch is brill and due to @oldriders quite clutch set up its a lot quieter and easier on the fingers once again thanks for...
I've also run it up on the paddock stand and it engages all gears up and down so I'm now going to put it on the road and see if it slips if so...
Ha ha what I meant to say was at the top of the stack I've had to remove one friction plate and one steal so that the pressure plate falls on a...
I've got the height roughly about but it ment kissing the last steal and friction plate will this cause any problems I've also fitted an old...
Will do plan is to set at 38 go out to my mates ten miles away with spare plates in pocket and see how it does will taking my last steel and last...
How ever Rick I've done the quite clutch mod by replacing the first steel with an old 2 mm friction plate
I've checked and checked with a full stack it's about 3 mil with the last plate and steel taken out is about 7 mill
@RickyX
That's with last steel and last friction took out [ATTACH]
That's with full pack in
Is that 4 to 5 mil to the steal from the end of the basket inside the basket or overlap the outside of the basket [ATTACH]
No need for that
Please help I want to get out on it today
Hope some one gets this soon I've built clutch up by putting old friction in first then steel then friction then dished with dot to outside and so...
Hi need a quick answer please what is the recommended clutch stack height for a 749 I'm going to throw it in today and try it herd it's between...
