Separate names with a comma.
Dears I ve tighten the chain of a 199R 2015 and I see in forums values of the 2 rear bolts of 25NM and 30-35NM.. Anyone with a service manual...
Dear all, Thanks for your time on this. I read each and every comment carefully and u r right its a connection, earth ground somewhere at the...
What do you mean Andy?
We decided we change the ecu with a similar one and take it from there. Reason being the diagnostics as all coils, rpm sensor and dash are...
Diagnostic results[ATTACH]
Thank you to all for comments. No They are appreciated indeed. Just came back to answer now. I will address each one of the pointers thanks The...
Dears, 998S with full termis on and ecu to match, 32.000kms and so far so good. Changed the lamps to same halogen type H1 and H3 but 30%...
Andreas I have one but for a 998..would it fit?
We ve ve checked the thermostat and its fine. Also changed coolant to ice-sth which supposedly lowers the temperature..for temp gauge ,we used one...
Yeap system flush was the first thing we did. As well as the water pump and whether those fins are ok.. the bike was basically idle for years so...
Yes we have. Between the max amd min mark so it is ok. My mechanic believes is the mapping on the ecu as they put a 998R ecu.
Thanks for reply. Well highway temperature now ranges around 20C and speeds never below 120-140kmh. It shouldnt run that hot. My 996SPS and 916...
