Separate names with a comma.
tested sensor and i am getting 0.84 using 200k ohms but only at certain terminals on the sensor connector
started the bike and its firing more but then cutting out. i kept doing this and then PK.UP 34.0 appeared, pick-up sensor error. the bike still...
the pump is priming and i have removed it , all the hoses/ connections look ok. got new o-rings fitted to the quick release connectors so i will...
is it possible to test all of the pump and internal hoses using its connector with battery connected to the bike, submerged in water with a dye...
tank off and removed fuel pump, everything on pump looked ok. tested solenoid @ 12v giving me 12.45. still firing on pressing starter button but...
i have a connector on it to byepass the sidestand. ie, bridged out
just found a clip/video for a problem solver on youtube under ERROR CODE CAN 38.0 SOLUTION. I looked at all the fuses about 3 times but when i...
its possible that i do have two faults. when i was in the layby the bike would start but then cut out when put into gear. then with some of the...
will do. i have it on cd but my older laptop plays up sometimes.
yes, thats the one i found on youtube
i,m getting 0.6 at all 3 wires with the multimeter set at 200 ohms
does this stator look ok ,or should i replace it. discol[ATTACH] [ATTACH] [ATTACH] oured on one side
it was a TEXA that was used and i was also told that all the local mechanics use texa as well.
thats what the bike mechanic said with the non ducati diagnostics, test everything separately . i will try and get it tested on something that can...
thats the one i have ordered from aliexpress , £1.90 in a sale. rather than paying 2 x p/p and their time rewinding it. i would rather buy a new...
