Separate names with a comma.
There's a reason for the phrase 'ride it like you stole it'.
Vacuum bleeders tend to pull air in around the threads of the bleeder valve while pulling fluid from the system. A bit of grease or vaseline...
For the front it's not overly complex to change the fork oil, if you want to tackle yourself. Fork oil change is recommended at 18k miles, but I...
If the dealers there are anything like the dealers in the US, then the whining noise is probably coming from your wallet.:) Seriously though,...
Be careful with PNs on eBay, plenty of sellers don't have a clue what they're selling (yes, there's a story there). Best place I've found for...
Like Gunz says big temp swings are the norm it seems. From 140ish F to fans on plus in traffic (217 I think is the fans on temp). Even in hotter...
FWIW 3M makes an adhesion promoter (86A) for 8671 tape, available in single use wipes, not sure of the cost.
I had that on my 1200. I think it’s more from chain whipping on the slack side of the loop and the close tolerance between chain an tire. All...
Per the owners manual maintenance chart Yes on the oil at 12Months T-belts 18K/5Y Demso 18K no calendar
I've got similar, so interested in hearing what others say. Mines like a very slight surge type thing at steady throttle.
I had a cam angle sensor fail that made the bike respond similar to what you describe. Mine happened to be the vertical cyl intake sensor, but any...
Go for the easy stuff first. Any ground wires disturbed during install? You've got battery voltage across the battery terminals; what about from...
They are indeed, see item 4 below. From Ducati of Omaha website parts catalog.[ATTACH]
These are a little spendy but look like full control access. And $14.95US shipping globally....
Anyone had problems with 1200 DVT cam position sensor or DVT solenoid valves? Getting an engine light with codes for cam position sensor. Approx...
