749 749/999 Black Swing Arm Chain Adjusters

Just for your attention...... 24 sets were shipped today. more to follow.

 

Excited about these is an understatement!!!!!

 

Mine turned up yesterday,

Jamie, you sir, are a legend.

Very pleased.

 

I'm waiting by my door....................whimpering

 

Arrived this morning
A thing of beauty!

 

Still whimpering by the door here...…………..

 

Stopped whimpering now

 

pics of them installed plis!
for those of us on the other side of the world who have to wait a couple of weeks for ours to arrive

 

I was just going to fit them, but I’m going out for a ride instead

 

Do the studs at the back of the swingarm need to come out to accommodate the rear clamp?

 

I’m not sure on the intended as I just followed the Gilles design. I’d assume so.

 

Or maybe they are supposed to go right to the far side.

 

Also, the spindle sits on the outer edge. I’m assuming it should sit inside?

 

Like this?

 

Possibly. Maybe someone has the instructions from the Gilles sets.

 

I can’t see what your showing me

 

This is as far as my spindle will go in so won’t sit flush pal!

 

Oh dear. Let me look at the ones I have here. All too good to be true.

 

Ok I’ve had a measure up of the pin that I have here and I have noticed on mine the flats are not machined Bob on centre to the spinal shaft.
I popped out in the lathe and took a skim and you can see the head Is not concentric to the shaft and the flats are off to the centre line.

Good old Ducati