Separate names with a comma.
I would get the bores accurately measured before proceeding you need to be confident they are indeed round and within tolerance then I’ll put you...
I know of a 1098RS (1198) genuine complete engine, low miles since rebuild thats available....Boom 190hp!
Have you measured and confirmed the main bearing housings on the crank cases are round and within tolerance..?
Did you go to Seville? [ATTACH]
Once older bike to adjust the chain on the eccentric is anti clockwise On the v4 it is clockwise…
Still.. could be worse, they could be in garish red…..:cool:
Human error?:innocent:
Slightly shorter bolt?
Nope… take it off put the lever in the correct place line it up with the cut out, and then push the lever as if you are changing gear to get the...
You have the angle of the drop lever wrong in relation to the link rod! It wants to be 90 degrees for ease of use. Probably need to shorten the...
Yes because they are not original and weee probably swapped during an engine rebuild as they are stronger for racing. They then painted them to...
With a new friction set you can use all 1.5… As they wear down you gradually replace with a 2mm each time there is a bit of wear and it doesn’t...
My bad been a while…. Of course as if you put the steel in first and the slipper works it drops down behind the hub
You have 2mm and 1.5 mm steel plates. with a slipper clutch the stack height fitted is really important for correct operation of the slipper...
did you sell the bike?
Its in MCN....has to be true......
The main purpose of this is to accommodate after market clip ons by eliminating the locating lug on the std one
The std tc is a moment in time 1098r very agricultural 1198 better but still 2009 The nemesis improved it but still what 15 years out of date...
I know how it worked in fact how it has always worked…. No rant just the facts. now I’ll step aside for the massive queue on here to buy the...
3999 to go then…
