Separate names with a comma.
You have a bit of a conundrum. Is it an orphan dropped at some time and replaced? Or, is it a component that is missing? When you consider the...
It is the “Software access expires if not renewed” that is concerning.
Looks like DTCs and Service lights only https://web-file.topdon.com/topdon-web/information_download/TopScan-Moto-User-Manual.pdf
From the manufacturer’s website Motorcycle Diagnostic Function *Free upgrade for the first year, and follows a subscription fee of $99.99 per year...
Run a jumper cable from the battery negative to a good earth on the engine or frame. See if that makes a difference. If it does run a secondary...
Correct. It should have been epoxied to the top part of the tank inner. You use a wire coat hanger shaped like a ‘Tick’ to insert it through the...
Do not do it. Be patient. If you are desperate to find out then switch out the headlight relay. It is the same type.
Highly likely
It may be your coil/injector/pump relay has failed. These are a £3 part and are prone to water ingress and verdigris. Available off ebay, search...
Charge your battery
On the wiring loom is a small black fly lead. It goes under one of the ECU bolts.
Was the DP map you flashed HW103 as well?
What type of ECU do you have. IAW59M? IAW5AM? What hardware value HW010, HW610, HW103? What file size map file are you flashing? 256kb or 321kb?
1. Makes sure you have connected the little black flylead under one of the ECU fixing bolts. 2. Connect the Fiat adaptor to the diagnostic port....
There are 4 fuses on the right side of the light casting on the inside of the nose cone. Remove the front fuse (D) in the handbook. Count to 10...
https://www.howmanyleft.co.uk/vehicle/ducati_998s_bostrom
https://www.autoevolution.com/moto/ducati-998s-bostrom-replica-2002.html#aeng_ducati-998s-bayliss-replica-3000-998...
[MEDIA]
Take a punt on the secondary IWP162...
Looks like you have ID’d the 12 hole. The 28040161A is an IWP189...
