Separate names with a comma.
No. What make were the old seals you removed ?
If you want to make sure the grease stays there and doesn’t wash out for a long long time use a white lithium based marine grease, available in a...
Not sure what your after Mike. There are no orings behind the piston, just the fluid & dust seals the piston glides in/out through. Of you had a...
Did the mechanic not start the bike after doing the belts? I think you perhaps ought to give him a call to discuss and get him to look at it...
Just be aware the Motul 660 fluid really should be changed annually IME. You’ll notice it goes really dark much much quicker than their regular...
In a word - No. I could give a long winded explanation as to exactly how the TPS and ECU and PC all work and interact with each other but that...
Yep, you’re right, I’m trying to find his other post now because for some reason I had in mind the single piston rear caliper with a single pin...
If one piston has less stictiob than another it’s not uncommon for it to move first. Note you’ll only notice this really with the caliper off the...
Did you give it a good clean when it was off? And regrease the cleaned pistons?
I believe @Tally is talking about the rear caliper not the front ones. Perhaps I’m doing it wrong but I’ve never found it easy to get the pin...
Check the other thread on rear calipers, I responded there. It’s unlikely you bent the caliper mounting plate. The disk does run very very close...
It only stays in place once the pin is pushed through. It’s a bugger to get the pin back through :mad: as the spring has to be pushed down in the...
Their different product numbers to indicate the difference between left and right fork bottoms. Unless decent quality seals such as Ohlins, SKF...
You’ll not go wrong with SKF stuff.
You want SKF bearings 6005-2RSH-C3 47OD/25ID/12width https://www.123bearing.co.uk/section?q=SKF+6005-2RSH-C3 less than a fiver each.
Karcher K4 power control flex I found to be the best VFM.
Useful info, thanks, but feck me it’s not rocket science to get a website that functions these days is it?
I didn’t realise titanium was magnetic, every day’s a school day :upyeah:
Spray Owatrol oil on it once it’s been polished up, it will never corrode again.
What holds the magnetic insert in place? Just an interference fit?
