Separate names with a comma.
Would you even need to split the chain to change the front sprocket. I did it on a monster 696. No splitting of chain needed to go from 15 to 14...
I would measure the static and rider sag with what you have. As a ballpark, set your static sag to 10mm by adding or reducing preload. then sit on...
They can be difficult to get going. I have a cheap Chinese vacuum bleeder that hooks up to a compressor. Sucks the fluid through from the bleed...
Hi all, I have fitted a Rapidbike Evo to my Monster 696. It feels like it's actually working very well but it throws up an error. EML comes on...
Oh you do need to brim it. If you don't the acid vapour from the vinegar will make the exposed metal go rusty. You can dilute it a bit with water,...
I made this puller and it didn't work for me at all. I actually made parts off it from much thicker steel and it still bent like a banana. A...
Mine had gaskets when new but I have long removed them and use three bond. The 0.2 mm more or less makes near enough no difference on the clutch...
It's been around at least 20 years. We had some stuff laser welded back then but it was very specialized. I'm not sure if it's much good for...
Laser welding is really cool. Literally, keeps the heat very localised.
I use a browser called AdBlock on my phone. I don't get any adverts at all.
I thought Tig welding is the way forward but some electrical or plumbers solder is a good shout and worth a try. If you get it hot enough to flow...
My question would be: why does a legitimate owner not bother to get the V5 first which would make the bike so much easier to sell, possibly for a...
Where is the WTF button when you need it. :D
I wouldn't pay 3K without knowing what's what inside that engine. Those broken bits could have caused all manner of damage. As a bike it's worth...
I imagine tyres are like oil. We like what we like and it's very subjective. I doubt many of us can really really tell the difference between...
The Gallup 360 worked extremely well on my brambles. I did apply in the autumn and left it all winter before cutting them back. Not on purpose,...
If you ground that wire the gauge has to go to max yes. The erratic gauge could also be a bad connection to the sensor or it could be the sensor....
The gauge is easily checked by grounding the wire. It should then go to max temperature. Fluctuation in temperature the way you describe, if...
Could simply be the pressure cap not sealing properly or releasing at a lower pressure.
Max level when cold is too much on my 916 and it will cough the excess out. I fill to min level when cold.
