Separate names with a comma.
Any tips, make sure your test ride isn't far from a hospital. ;) Steve
Passed on to me as an apprentice, it was my Grandads and is always kept in the van and still used. [ATTACH] Could be 100 years old.
Just buy a longer bolt, cut the head off and round the end on a bench grinder. Steve [ATTACH]
Havn't really looked into it lately, I have seen the ends for sale but wasn't sure if they would fit my riveter, didn't want to buy the complete...
The quad stake is quite expensive, like you I only have the normal one, I used the old and tested method, a lump hammer behind and a ball pein...
Normal split links are slightly hollow on the end to allow for the peening over, the renthal is solid, it needs a quad stake riveter or as I did...
Have you got a quad stake riveter for that link or are you doing it the old fashioned way, a normal riveter won't peen it over.
[ATTACH] The 10mm blead nipple fits the earlier calipers. Steve
Permatex® Ultra Copper® Maximum Temperature RTV Silicone Gasket Maker Category: Ultra Series Gasket Makers OEM specified. For high operating...
I removed my earlier post as to not confuse others, my bikes do not have sensors so silicone works perfectly well. Steve
Unmistakable Matlock Bath.
Wetton and Monsal Head.
Just how i feel and the way I will use the forum in the future. Steve
Friendly bunch!! have you checked your pockets.
That looks like the outer cage or bush the needle roller would be housed in. Steve
Lucas auto gear, it's whatever is available at a sensible price, I had to remove the cam to get the cable out, just replaced it again and locked...
After fitting an auto advance retard gear on the Triton magneto , today I removed the manual cable adjuster and fixed it solid. [ATTACH] [ATTACH]...
He's open, but with a backlog of work. Steve https://m.facebook.com/story.php?story_fbid=3163330657064144&id=206397132757526
Just had to try the TRV and yep your spot on it is the same thread. [ATTACH] [ATTACH] [ATTACH] A complete valve costs from £7. Great tip. Steve
You have to take the plug off first to get the new nut on, this might help. Connector pin removal.pdf
