Separate names with a comma.
Have you owned a vee / L twin before , they do seem a bit lumpy lump compared to your average inline 4 . I just like the low down torque they...
Always thought that with buying new that if you re sell very soon after you loose that vat content at least .... whether it's got 1 mile on clock...
Arrrr sorry .... you did get it code tested ..... strange ... would of thought it would of stored a code ??
Could be a shock / pre load adjuster fault also . Better get some more in depth code testing / active tests done before you condem one part or...
Got to ask ...... Did the bike start faulting immediately after fitting the levers ? Is the clutch switch just a two wire micro switch ? Is the...
Bad publicity ......what about Volkswagon / audi groups uncovered multi billion pound emissions fiddling , countless recalls on some of the new...
So you had one steel left out ?? Sounds just like mine did , proper chakka chak at idle , it's much better now . You may find it gets a little...
post some pics up of it fitted ,and a test ride sound clip .....as i know you like this type ofv nerdyness :grinning:
Loose battery terminal ??
Front sprocket nut loose maybe
If you have less Spring tension weight would that decrease pack friction ....suppose 1 missing steel wouldn't make much difference really , mine...
If it ends up like mine you will have a steel plate left over . So friction plate in first , then one steel , then alternate to end of basket , on...
On cars if the thermostat is in the lower hose or water housing on the block and it gets stuck shut the top hose and first few inches of the top...
On a bike so new can you reject it ......lemon laws or summat ??
I've looked all over my 1100 hyper and cannot find that plug .....
Yeah they do like a bit of a head shake don't they ......its just the whole style of the bike I think . Some of the new generation bikes have...
Agreed , but like already a been said there's been to many cases of crank or bearing failure on the earlier models ..... in fact researched by...
Cranks can fail due to incorrect support from there bearings , not supported properly cranks can flex and fracture , so not always a manufacturing...
Yes I have done mine , I suppose it's a little cheat really as the real issue is that the tabs of the friction plates are worn and the fingers of...
I think the write up on the bike is very fair .... good points bad points ,warts and all .... I like the honesty . See ,thing is sometimes with...
