Separate names with a comma.
Do you mean the 'bolt' that attaches the caliper to the torque arm? If so, I'll probably have the corresponding item from my Mk V, and could...
Had my rear Showa rebuilt by Maxton - better damping, but biggest improvement was them fitting a spring more appropriate to my weight. IIRC,...
Al, Wouldn't it be easier to make one from scratch - bit of alloy bar plus 2 rose joints? Sent from my P01M using Tapatalk
I'm interested - run up from Yorkshire should get the bike nicely warmed up. All subject to date of course Sent from my P01M using Tapatalk
I have an RW unit fitted on my SL - I used OE rubbers on my own brackets (glasses in). The rear ones were t**ts to position, but give...
Have you checked the settings on the slow air screws (as opposed to fuel screws)? Sent from my XT890 using Tapatalk
There's a relevant thread on the .ms forum - two options - both use an Ignitech unit, triggered either by a sensor reading the timing gear teeth,...
Maybe worth a chat with Alldens Exhausts - I've always found them very helpful, and they must be fairly local to you. Sent from my P01M using...
I can't add much to what's already been said, except the obvious - you've got a touch of free play on the outer cable when the throttle is shut?...
Airbox (assuming you keep it), mounts differently at the rear. Sent from my P01M using Tapatalk
Apologies - pics as requested, albeit quality not great. [ATTACH] [ATTACH] [ATTACH]
Yep, no problem. Got to do the domestic stuff at moment, but will sort something out tonight. Sent from my P01M using Tapatalk
With similar space constraints, I've gone with some Suzuki mirrors (is that heresy?) - from a GSXF I think. They retract nicely (click-stop), are...
Thanks for the offer Ian. I have a guy in mind, if he's still around - he's only about 1/2 mile from me, and used to build specials (cars). Just...
I couldn't justify ( to myself) the cost of a proper bike lift, but happened across some diy plans for one on ebay - uses a normal car hydraulic...
Keep us posted on progress - the standard set up for our bikes is pretty well known, but it would be interested to know how far from this (if at...
Yea, same reason - looks like your partner's been talking to mine! Sent from my P01M using Tapatalk
I left the centre gasket out - no problems. I used Threebond 1215, but would suspect any generic silicon gasket would work just as well. Only...
Like the idea, but not sure they'd work at the required angle? - can't find anything on't web that informs. Sent from my P01M using Tapatalk
Yep - would be best way - I'd also done an excel sheet with curves from different sources (Ducati kokusan, Silent Hektik, etc), which might be of...
