Separate names with a comma.
But only 5 minutes to fill up for another 100...
Can we expect them to no longer be 'budget' plates now then... :thinkingface: [ATTACH]
I couldn't find one last year that stocked bike filters, a couple that did car filters IIRC.
Here; https://www.ebay.co.uk/itm/126877768785 I've not searched but this seems a 'good' price for them, they aren't cheap anywhere and I had no...
I've had mine many years however, last year I noticed they were falling apart - the silicone? surrounds were crumbling so I needed some...
[IMG] Easily removable to clean as they just slide out once the tank's off.
If it's OK now and you remove the belts/refit new ones in the same position then what has changed with regards to the timing, what needs...
There was a change to the frame for racing; the 'Kyalami' frame which had a deeper 'V' in the bracing to allow fitment of a larger airbox. IIRC,...
748, 916 & 996 should be all the same but 998 is a different engine so not compatible.
This is a 916 head, early 748 and non 'E' later 748 are the same; [IMG] This is a 748E type head (actually from a Monster S4 but the same...
:eek: Didn't know they cost that much. I bought mine many years ago and they were expensive then but I ended up buying them from a seller in the...
I've had Samco hoses on my 916 for many years, using OAT coolant and not had any problems or leaks.
The box that my 50mm termis were supplied in had 102db written on it, no idea if that's an official rating or just someone's notes? But,...
That's the way forward, simply mark the pulleys as per the older bikes, job done. I don't understand why they stopped marking them and then...
It's there to seal the breather to the cap, you can remove it but if you do fuel will leak into the filler cap area under braking etc. Maybe trim...
Agree with all the above, just use the pulley timing dots. To add, I always think marking the belt is pointless, along with counting the teeth...
Depends if the piston just 'kissed' the edge of the valve or a full on hit - that 'kiss' might not feel much by hand but at 10,000rpm it could be...
If it's an ally basket then, yes you should use ally plates or the basket won't last long, the plain plates are still steel though.
I think they're all the same pulley-wise? and then, obviously all the pulleys need to be the same tooth count or it would run out of time. Belt...
