Separate names with a comma.
try a soldering iron and an plastic cable tie and try to melt the 2 together in the threaded hole and the self tapper should be a tighter fit
Have you had the chip out of the ECU and put it back the wrong way round
It was a good original part inc mono under tray ,tool tray and helmet loop all intact,, still big money tho !!!!!
made in scotland but assembled in hong kong
i keep looking at RGV's , fancy 1 with a tyga seat unit and pipers each side of the bike, had 1 in the 90's.. brilliant
including under tray which is mono i'd say nearer 4 than 3 but good luck !!!! i got 1 last year for £100 :-) off ebay
this is on ebay ,,, nothing to do with me , saw it and thought there will be people on the forum who'l be interested
pretty sure it earths on to the regulator back plate
is the slave cylinder seated correctly and 3 bolts tight ?? could be pushing the slave away and giving you the clicking sensation through the leaver
sounds like an insurance right off to me. might be the answer to your prayers !!!
what does it state on your V5
if the disc is running through the center of the caliper its got to be right
The theory is the disc waving from side to side gyroscopically pushes the brake pads into the callipers slightly, creating less friction between...
The amount of float inbetween the disc and the carrier, if you had 1 in each hand you’d feel the difference straight away.. other than that it’s...
888 sp 748 sp 916 sp all have cast iron fully floating brembo as per 2nd pic,, the 1st pic look like monster or multi strada
random real time readings ????
standard ohlins forks are'nt really much better than the the gold Tin showa,, if you go ohlins you'll also need an ohlins bottom yoke to suit, so...
coil leads braking down under load ??
I have a December 99 number 687 owned since 2001` 3 or 4 years ago I emailed Ducati , I got confirmation back and also from the horses mouth they...
Check the engine casing behind the vertical cylinder is the best place to look, it should be rough / textured as SPS is a sand cast mould....
