Separate names with a comma.
Anyone have a rear paddock stand for 916/996 they would like to sell, I can arrange collection
Hi shirt My monster has a Werks slip on fitted but do not really like the looking it, noticed you have fitted an SC slip on to yours are you...
Spoke to Richard at Maxton and he is making a custom set of GP20 cartridges and an NR30 rear shock for the Monster, he is also selecting the...
thinking of fitting a carbon slip on exhaust can to the Evo, does anyone have any suggestions of type/make and any photos Steve
Looks like it will be forks out and sent up to Maxton, they will rebuild with cartridge kit and springs to suit and return for £600, they also...
Are they a direct fit, as the Evo has ABS, sensor is on the forks
Well approached a few of the suspension specialists and all say the marzocchi forks have poor internals. Most suggest new cartridge kit, valved...
Hi Ricky What is the part number for the Ohlins you have on your monster
I think this may be part of the problem I am 14 stone kitted up, looking at other internet posts and comments it looks like you are correct about...
So just been out to measure and this is what we have FRONT Fully extended 130 Bike only 90 Bike and rider 80 So 50 looks about right for starters...
No problem just need to pop out for a couple of hours so will check the measurements when I get back Just to be clear 1st from top of calliper...
That’s great, will try to adjust it in the morning and let you know Really do appreciate all your time guys
Well these are the front forks Free length 434 Bike on ground 395 Bike and rider 380 So looks like 54 sag so needs more compression on the red nut...
I will go into the garage after dinner and do a recheck, will let you know the numbers. Looks like I was calculating the wrong dimensions Thanks guys
I am using a socket, the damage was already there, I have only had the bike for 3 weeks
Zip tie around the fork leg, pushed up to the dust seal with the bike standing upright with no one on the bike, then sit on the bike, then get off...
Just one other point the bike has stood overnight so the oil is cold, should the bike been given a good ride before making changes so the oil has...
Yes, wound them both anti clockwise until they came to the end of travel this gave 20mm sag, wound them in equally one turn on each leg until a...
One red nut on the top of each fork
So completely anti clockwise should give more sag, is that correct ? Might just going completely clockwise to see what happens. Sorted the rear...
