Separate names with a comma.
Not sure what you mean bradders as my Pani has 104db recorded in the Reg Doc. Are you saying the reg test is less strict than tracks?
Garage Accessories - Pro Italia Motorcycles It appears that the US version includes the Panigale according to Pro Italia albeit at an eye watering...
Check out the traction control if fitting non standard tyres, especially downsizing, as I believe it will need resetting. hope this helps
I am not 100% sure but believe the adapter plate fitted to the bike is only required for the Multistrada, not for the 848. That's presumably why...
Not quite what you are after but I have just used the Bursig stand for the first time on my Panigale. Although the spigots fit into the large...
None are so deaf as those that don't want to hear
The SHARP test you refer to is for the standard C3 and not the C3 Pro the OP is "showing off in this thread". In any event, SHARP tests are not as...
Exactly that Nelly. Had my 1st service 10 days back with the new engine map that was released very recently. Cured some of the hesitation during...
Try using salt water as this is known to bugger up polished ali fairly quickly but is not too agressive as some chemicals would be. You will need...
I don't have this problem at all since the latest engine map uploaded at my 1st service last weekend - Can't say I noticed it before but that was...
Having already tried this pair of Fiams on Rommel's Tractor, I have fitted them to my 900SS. They are also firkin loud but in a more conventional...
Just a thought - Could you not use a variation of the Fiam horn relay with 87a pinout? I believe this terminal provides power on the secondary...
I tend to treat what "dealers" say with a large pinch of salt as its your feel that counts not theirs. The F setting is primarily for the track...
Before you start changing settings, is your rear link set to F (flat) or P (progressive)? The Flat setting was way to stiff for me on the dealers...
Well at 62 years young, I sympathise but way back in my youth, tool hire shops were plentiful for those "special tools" and Halfrauds did offer a...
Absolutely agree with Chris above and would add that a t/w in unskilled hands is always going to be worse than no t/w in skilled hands. I can...
Presumably it also involves sex and travel so phuk off :biggrin:
Each to their own I guess but tight enough is not the issue. You are overlooking equal torque application as well as overtightening. Consider...
Just as a follow up in case it helps others, I finally took delivery on my Pani a few weeks back and fitted the comfort seats shown below...
If you could "adjust" it with a hammer and srewdriver, then a light tap on the end of the c-spanner with a small club hammer should have done the...
