Separate names with a comma.
Well I guess you should give this a good read then. ;-) Ducati Desmodromic rockers
Well, I for one have always done this on my 748 & 748R that I owned, as recommended by more than a few fully Ducati trained mechanics regarding...
To keep your rockers in good health, always let the engine tick over at around 1000 rpm for a minimum of 90 seconds, as that is how long it takes...
Another quick question, how easy is it to removed damaged sections of film??
[ATTACH] [ATTACH] [ATTACH] [ATTACH] This is our Hugo
Thats a Ducati performance item
Inc postage etc was £55 for the pair :-( And yes, you must get the Viton ring ones
Had a CPC metal one as per the picture fitted to my 748R as the plastic one would not seal when the male was removed, cost £40 as I had to get it...
I believe (so I have been told)that the ones fitted to Triumph's are metal and are ideal replacements for Ducati ones.
Just needs a nice gold side plate Tsubaki chain :-)
Paul, it might be worth checking if you can cut the manifold header section off where it joins the exhaust port on my 1098r maniflod system and...
Give Neil (Nelly from above post) a ring, he may be able to do a postle flash for you.
Been taking my bike (s) there for over 10 years, he now has a dyno and does the Rexxerr flash service by post or taking your bike :-)
This is a good read and very useful, worth comparing to yours. 996/748 Suspension Setup And of course, this one from Tech wizard Shasamm is also...
True, but it can be a twat to put back in
That looks pretty well seized, if you can't undo the two nuts ( the bottom nut with the marking all the way around it is left hand threaded) you...
My thoughts as well
A good starting point on the ride height adjuster is 3-4 threads showing at each end, how does thst compare to yours??(that is if you have a...
As Paul said, they are different. If the bike is not set up correctly for sags and ride height, no manner of adjusting will make it feel right,...
Well, if they have been on the bike for 4 years and used, there will be less tread in the centre than on the edge, so when you ride onto a...
