Separate names with a comma.
Here is the engine number of my 998r [ATTACH]
My 998R does not have a B in it.
Have you weighed the rider? Its the cheapest way to reduce the gross weight!!
So I have been through the entire setup procedure again. Re set the TPS, ensured the cold start warm up was inactive, re set throttle linkage...
I have no idea whether 999's have separate bushes. In the 998 parts list, the throttle bodies are one part number only.
That was me putting marks on the butterfly when I had it apart! I have replaced the plastic cups and balls with new balls and metal cups so they...
Yes Borgo Panigale the butterflies and shafts are all ok and tight.
Yes Borgo Panigale. They are tight and fit well in the bores.
Bridgland, I think my post above is the only thing! I should have looked at them more closely earlier in the build so I could make a plan....
The rough running at lower revs is causing me some thought. Its clear that there is some play in both throttle shaft bushes. This is causing one...
Hi Ian The mount point for the battery fixing bracket is damaged so without a complete battery carrier, I decided to make my own system! Thanks...
Perhaps I should mention that this bike will be for sale sometime in the next 12 months. If you might be interested, please PM me and I will...
Well thats about it. I have just taken it down a private road near me and its seems about 90%. Its possible the vertical injector is still got...
I've booked an MoT on Monday so am trying to make it roadworthy. Rear cylinder does not want to idle and I think the injector is still a bit...
Is the lever with the strain gauge built in? I don't plan to put a quick shift on. Could you PM the prices of both please?
I am looking for a race shift lever for this project. Does anyone have one for sale or know of a reasonable supplier? It does not need quick...
RickyX. You can see where I have put the insert in in the attached photos. All it means is that the belly pan can stay on the bike with...
So with all these cost saving ideas, why does someone not make Jonny an offer for the rolling chassis and all the bits and start a project?...
I machined an insert to fit the hole where the tange on the belly pan would have fitted. There is a mounting hole on the belly pan to bolt through...
Taken the ball end of the throttle connection on vertical cyl and replaced with the new one supplied with the new linkage. Both throttles now...
