Separate names with a comma.
The 4 pins have shoulders on them which pulls up to the hub face which stops them pulling through. brian.
The only thing that can change is the pressure plate bearing depth to drive face of the pressure plate ? have you any pics of what your fitting....
I wouldn't use them, stay with the metal lock nuts. brian.
When you had the set up you wanted did you have any lift on the pressure plate at all ? You could measure the distance from the face of the...
I'm going to ask this did you swap the bearing and the lifter pin over ? brian.
The brake discs bobbins can be replaced, but its the bell carrier that usually wears that the bobbins locate to. Have you cleaned all the...
The first question would be ,when was the fuel filter last changed? brian.
Laverda 1200 Mirage Ts 180* what a great motorcycle i would buy one tomorrow if they still made them . brian.
The safest way would be to support the bike engine so the weight of the bike is off the rear suspension. As the shock and ride height share the...
Brembo give Bainchi a paw, sad times mate. [ATTACH]
+1 to this. brian.
If you just jump the starter, do away with the button/solenoid/ignition you will narrow it down to just the starter(might just need a brush kit)...
Have a good look at the 2-pin connector the female pins in the plug can some times splay out and give a poor connection you might need to close...
You could get them re-plated and a few other bits to for the price of new parts. brian.
The thing is if you have your bike serviced and bought from the same dealer and you dont take the extra 3rd year if some thing went wrong as a...
If it was me i would just keep the 24 month standard warranty.:smile: brian.
How many miles do you do per year and how do you ride it and how long do you keep your bikes for.
Sorry the collective require photographic proof.:smile:
So all the information from that forum now belongs to some place in Coventry.
Very nice a red ducati. brian.
