Separate names with a comma.
I took the cylinder off and half the oil control ring just dropped out. Could explain a little oil burning. I was removing to replace the base...
Truly, this forum has been really helpful. I’m subscribing this month. The guides and past posts are invaluable. Plus, if you put a post up,...
If you’re feeling rich, have a look at the ABBA skylift. If you do a lot of work on the bike, it’s worth it IMO.
Okay guys. Red faced time Completely stripped the job down again and built the fork back together. No idea what I possibly could have done...
Yeah, have to have them properly dried out if you’re going on volume. That tool is amazing. Wish I had one... I have to keep bothering my father...
They are the same as the ones on my bike yes. Fully adjustable and great forks (if they’d only work properly :-))
Yeah, I measured from the top of the tube, pumping to try and prevent an air lock, but it is possible I still have one, or that the seals are...
Yes. Two small, flathead adjusters on each leg. One in the centre of the preload adjustment and the other down the bottom of the leg. With the...
It’s all I got atm.
Yes. Sorry if that wasn’t clear. I set the pre load, rebound dampening and compression dampening to the same on both legs for a comparison...
Yes, it doesn’t seem to make a difference on one leg. The other leg works as expected though. Dampening increase and decrease as you turn the...
Not these forks. I’ll post an image and maybe a video if I can tonight. Cheers.
No. They don’t compress a lot to be fair. But I have a big wobbly belly to press down with. Believe me, they do move a bit Both set to same air...
They are both still off the bike. I’ve set them both to the same dampening and preload and (it’s not very technical but) bounced up and down on...
A great thought. Yeah, I pumped and pumped. Manual says at least 10, so I stopped counting at ten, but carried on until there was a smooth flow...
Both adjusters were turned out completely prior to dismantling them. As it says in the Haynes manual. But I’ve since adjusted them to ‘standard’...
Yes, I popped it in technical help, but then posted in Supersport. ...is that frowned upon? Sorry. I don’t use forums very often.
No way of knowing g because the bike came to me having not been used in a long time. There was barely any oil in the forks, so they weren’t...
Thanks for the reply. Apologies, I’m new to this. It didn’t mention anything in the guides about lining up any needle. Is this the needle in the...
The Showa forks are both fully adjustable. You need to match preload, compression and rebound dampening on both forks, so I would make a fair...
