Separate names with a comma.
no because im fitting GSXR k6 forks with gold spot radial calipers.
yes its just there are more sets of 749 discs available.
im looking at 6 bolts discs. can some one confirm that 749 discs are a 15mm offset and that they will fit a 848 wheel?
i have radials so moving them is a no go. i don't know what to do now iv heard from people that have run with the spacers and had no problems at...
are 848, 1098 etc brake discs all the same?
ok so iv just been out and took some measurements, the lip on the wheel is 6.5mm the disc is 4mm thick so with a 5mm spacer this leaves the disc...
thanks for the info is very helpful. these should fit, shouldn't they? Viper Fully Floating Wavy Front Brake Discs For Ducati 2000 748 R T01-FL |...
Ok so I done some browsing and correct me if I'm wrong the 848 disc spacing is 130mm. so my next question is is there any weight saving to be...
this is is what I thought would happen with my wheel, dukedesmo did you run into this problem with the 3 spoke wheel? im thinking maybe the lip on...
I did look at that, I packed them out with washers to 5mm but didn’t like the look of the inner part of the disc sitting so far on the edge of the...
I’ve started putting the new front end on to my project this afternoon and after taking a few measurements it looks like I need some brake discs...
Nelson iv got a 180 60 on and it does not fit with my rear huger, the tyre is to tall so I cut the huger off. Awesome tyre though.
The radiator is in, it’s in the original Ducati position.
Andy b, are you talking about the front wheel to fairing (v piece)? If so the fairings fit, I just have to make some alterations to the side to...
I understand what you are saying and common sense would say go the 1098, 1198 route, but I wanted a new project after spending a few years...
It’s not standard its my duke/tlr project The bike will be road legal (only just) but it will be mainly used for track.
Thanks flo, That’s the guy I bought the engine mountings off. He said they were a straight fit but I had reshape the n/s one completely to get the...
Andy b, I did weight it front and back with digi scales, that’s how I know how heavy it is. I just looked at the figures again and it’s not even...
cranker :upyeah: Am i right in thinking that the 748 has 50/50 weight distribution? And this set up is designed to put a bit more weight on the...
Hi guy someone posted a link up to some section 8 set up figures but i can’t remember who? Any chance someone could repost it.
