Separate names with a comma.
The track day is at Donington 98db day so I think I’ll justput the standard cans back on to play it safe, also it will save the carbon cansif the...
I’m booked on a track day next month which is a quiet day (98db),I know it’s a difficult thing to answer but can anybody say if I will pass...
What fork oil weight and air gap do you guys recommend I putin my 98 748 with showa forks?
Ok I bleed it from the banjo bolt it has improved itslightly so I’ll try it for a bit and see how I get on with it. Thanks for all your help.
I went over the callipersthe other day when I fitted the new pads, all the pistons are nice and free. I think the bleed nipple on the master...
Thanks for the info nelson there is some useful stuff there,but I don’t think I’m ready to splash out on some new callipers just yet. Hughdg, iv...
Since I bought my 748 it has always had a poor front brake, as in they stopped you but the titax span adjuster is all the way around on number 5...
Thanks for the advice, as far as oil goes I try and always useMotul 7100 in my bikes as I have found this to be one of the best I came across. My...
Good job I enjoy tinkering.:wink:
Panic over checked the connector and it was a bit lose,cleaned it up and squashed the connector a bit and all fine now.
Just been out on the bike to test the oil breather out forleeks and it all looks good, but now I have a new problem when I first set off theoil...
Yes, engine was slightly warm to the touch and throttle waswide open. On another note the low fuel light does not work so how manymiles can I get...
I managed to do a compression test today, front cylinder wasreading 137 psi and the rear was 140 psi. Not quite a 150 but it’s nice to knowit’s...
I haven’t ridden it yet but finger crossed:upyeah:
Nelly: the photo was taken just before I tightened everythingup. I never resealed the breather into the crank case as I could not move itand did...
I couldn’t do the compression test today as my tester only goes down to m14 but I had another look at the smoke on tick over and I’m convinced...
Thanks for the information Chris i’ll check tomorrow and reportback. Are the plugs easy to get at?
Yes it’s a stock breather set up. I’ll grab the compression tester from work tomorrow and test them, what psi should they be??
I haven’t over filled it with oil. It does smoke very lightly when it’s cold and ticking over but I would say that it looks more like condensation...
I have just returned from a 2 hour trip on the 748 and noticed oil all over the back of theengine/gearbox, it looks like it is coming from the...
